LDB200DEU Site Information Form (site log)
International GNSS Service
See Instructions at:
https://files.igs.org/pub/station/general/sitelog_instr.txt
0. Form
Prepared by (full name) : GREF Operator (operator.gref@bkg.bund.de)
Date Prepared : 2024-02-15
Report Type : UPDATE
If Update:
Previous Site Log : ldb200deu_20230419.log
Modified/Added Sections : 2, 3.13, 3.14, 11, 13
1. Site Identification of the GNSS Monument
Site Name : Lindenberg
Four Character ID : LDB2
Monument Inscription :
IERS DOMES Number : 14114M002
CDP Number : (A4)
Monument Description : Steelpipe with heat protection
Height of the Monument : 1.7 m
Monument Foundation : 2005
Foundation Depth : 10 m
Marker Description : SURVEY MARKER BOLT ON THE PILLAR
Date Installed : 2005-09-28
Geologic Characteristic : CENOZOIC QUATERNARY
Bedrock Type : (IGNEOUS/METAMORPHIC/SEDIMENTARY)
Bedrock Condition : (FRESH/JOINTED/WEATHERED)
Fracture Spacing : (0 cm/1-10 cm/11-50 cm/51-200 cm/over 200 cm)
Fault zones nearby : NO
Distance/activity : (multiple lines)
Additional Information : Survey Marker Bolt on a pillar.
: Antenna mounted with a special screw
: adapter on a rivet thread of a circular
: tube of steel filled with concrete,
: 11,7 m length,
: placed at the meteorological station of the DWD
: Deutscher Wetterdienst in Lindenberg.
2. Site Location Information
City or Town : Lindenberg
State or Province : Brandenburg
Country : Germany
Tectonic Plate : EURASIAN
Approximate Position (ITRF)
X coordinate (m) : 3798344.700
Y coordinate (m) : 955553.300
Z coordinate (m) : 5017221.900
Latitude (N is +) : +521232.85
Longitude (E is +) : +0140715.34
Elevation (m,ellips.) : 159.5
Additional Information : (multiple lines)
3. GNSS Receiver Information
3.1 Receiver Type : JPS LEGACY
Satellite System : GPS+GLO
Serial Number : AG2A5QEYQDC
Firmware Version : E_GGD_2.5p1
Elevation Cutoff Setting : 0 deg
Date Installed : 2005-10-25T10:00Z
Date Removed : 2007-11-22T12:30Z
Temperature Stabiliz. : none
Additional Information : (multiple lines)
3.2 Receiver Type : JPS LEGACY
Satellite System : GPS+GLO
Serial Number : AG2A5QEYQDC
Firmware Version : 2.6.0 APR,18,2007
Elevation Cutoff Setting : 0 deg
Date Installed : 2007-11-22T12:30Z
Date Removed : 2008-01-29T09:15Z
Temperature Stabiliz. : none
Additional Information : (multiple lines)
3.3 Receiver Type : JPS LEGACY
Satellite System : GPS+GLO
Serial Number : AG2A5QEYQDC
Firmware Version : 2.6.1 JAN,10,2008
Elevation Cutoff Setting : 0 deg
Date Installed : 2008-01-29T10:00Z
Date Removed : 2015-03-24T09:00Z
Temperature Stabiliz. : none
Additional Information : (multiple lines)
3.4 Receiver Type : LEICA GR25
Satellite System : GPS+GLO+GAL+SBAS
Serial Number : 1831169
Firmware Version : 3.11.1639
Elevation Cutoff Setting : 0 deg
Date Installed : 2015-03-24T12:00Z
Date Removed : 2016-05-06T06:00Z
Temperature Stabiliz. : none
Additional Information : ME serial number BDU14060417
3.5 Receiver Type : LEICA GR25
Satellite System : GPS+GLO+GAL+SBAS
Serial Number : 1831169
Firmware Version : 3.22.1818
Elevation Cutoff Setting : 0 deg
Date Installed : 2016-05-06T06:00Z
Date Removed : 2016-07-20T09:00Z
Temperature Stabiliz. : none
Additional Information : ME serial number BDU14060417
3.6 Receiver Type : LEICA GR25
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 1831169
Firmware Version : 4.00.335
Elevation Cutoff Setting : 0 deg
Date Installed : 2016-07-20T09:00Z
Date Removed : 2017-04-11T06:45Z
Temperature Stabiliz. : none
Additional Information : ME serial number BDU14060417
3.7 Receiver Type : LEICA GR25
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 1831169
Firmware Version : 4.11.606
Elevation Cutoff Setting : 0 deg
Date Installed : 2017-04-11T06:45Z
Date Removed : 2018-05-09T10:00Z
Temperature Stabiliz. : none
Additional Information : ME serial number BDU14060417
3.8 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 1870606
Firmware Version : 4.20.232
Elevation Cutoff Setting : 0 deg
Date Installed : 2018-05-09T10:00Z
Date Removed : 2019-05-17T13:10Z
Temperature Stabiliz. : none
Additional Information : (multiple lines)
3.9 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 1870606
Firmware Version : 4.31.101/7.403
Elevation Cutoff Setting : 0 deg
Date Installed : 2019-05-17T13:10Z
Date Removed : 2021-05-31T12:05Z
Temperature Stabiliz. : none
Additional Information : (multiple lines)
3.10 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 1870606
Firmware Version : 4.50/7.710
Elevation Cutoff Setting : 0 deg
Date Installed : 2021-05-31T12:05Z
Date Removed : 2022-03-03T07:33Z
Temperature Stabiliz. : none
Additional Information : (multiple lines)
3.11 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 1870606
Firmware Version : 4.52/7.711
Elevation Cutoff Setting : 0 deg
Date Installed : 2022-03-03T07:33Z
Date Removed : 2022-09-05T11:28Z
Temperature Stabiliz. : none
Additional Information : (multiple lines)
3.12 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 1870606
Firmware Version : 4.60/7.811
Elevation Cutoff Setting : 0 deg
Date Installed : 2022-09-05T11:28Z
Date Removed : 2023-02-09T09:30Z
Temperature Stabiliz. : none
Additional Information : (multiple lines)
3.13 Receiver Type : JAVAD TRE_3 DELTA
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 02883
Firmware Version : 4.1.06-221128
Elevation Cutoff Setting : 0 deg
Date Installed : 2023-02-09T09:30Z
Date Removed : 2024-02-15T07:50Z
Temperature Stabiliz. : none
Additional Information : Board Id
: 193NV209A3QCX0QDSPVJ
3.14 Receiver Type : JAVAD TRE_3 DELTA
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 02883
Firmware Version : 4.3.00-231129
Elevation Cutoff Setting : 0 deg
Date Installed : 2024-02-15T07:50Z
Date Removed : CCYY-MM-DDThh:mmZ
Temperature Stabiliz. : none
Additional Information : Board Id
: 193NV209A3QCX0QDSPVJ
3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions)
Satellite System : (GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS)
Serial Number : (A20, but note the first A5 is used in SINEX)
Firmware Version : (A11)
Elevation Cutoff Setting : (deg)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Temperature Stabiliz. : (none or tolerance in degrees C)
Additional Information : (multiple lines)
4. GNSS Antenna Information
4.1 Antenna Type : TPSCR3_GGD CONE
Serial Number : 217-0244
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0470
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : CONE
Radome Serial Number :
Antenna Cable Type : AIRCOM+
Antenna Cable Length : 18 m
Date Installed : 2005-10-25T10:00Z
Date Removed : 2011-09-28T09:00Z
Additional Information : Antenna individual calibrated
: absolute by GEO++
4.2 Antenna Type : LEIAR25.R4 LEIT
Serial Number : 725072
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0470
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : LEIT
Radome Serial Number :
Antenna Cable Type : AIRCOM+
Antenna Cable Length : 18 m
Date Installed : 2011-09-28T10:00Z
Date Removed : 2019-08-08T06:20Z
Additional Information : Antenna individual calibrated
: absolute by GEO++
4.3 Antenna Type : LEIAR25.R4 LEIT
Serial Number : 10231046
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0470
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : LEIT
Radome Serial Number :
Antenna Cable Type : AIRCOM+
Antenna Cable Length : 18 m
Date Installed : 2019-08-08T06:20Z
Date Removed : CCYY-MM-DDThh:mmZ
Additional Information : Antenna individual calibrated absolutely by
: : GEO++ - ROBOT 2010-09-29
: : UNI BONN - CHAMBER 2010-10-28
: : UNI BONN - CHAMBER 2019-05-20
: : Senatsverwaltung Berlin - ROBOT 2019-06-21
4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions)
Serial Number : (A*, but note the first A5 is used in SINEX)
Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.)
Marker->ARP Up Ecc. (m) : (F8.4)
Marker->ARP North Ecc(m) : (F8.4)
Marker->ARP East Ecc(m) : (F8.4)
Alignment from True N : (deg; + is clockwise/east)
Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions)
Radome Serial Number :
Antenna Cable Type : (vendor & type number)
Antenna Cable Length : (m)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
5. Surveyed Local Ties
5.x Tied Marker Name :
Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc)
Tied Marker CDP Number : (A4)
Tied Marker DOMES Number : (A9)
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : (m)
dy (m) : (m)
dz (m) : (m)
Accuracy (mm) : (mm)
Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc)
Date Measured : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
6. Frequency Standard
6.1 Standard Type : INTERNAL
Input Frequency : (if external)
Effective Dates : 2005-09-28/CCYY-MM-DD
Notes : (multiple lines)
6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc)
Input Frequency : (if external)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
7. Collocation Information
7.1 Instrumentation Type : GNSS LDB201DEU
Status : PERMANENT
Effective Dates : 2017-06-07/CCYY-MM-DD
Notes : Secondary Receiver at the same antenna.
: More information and data available on
: request.
7.2 Instrumentation Type : CORNER REFLECTOR
Status : PERMANENT
Effective Dates : 2019-09-13/CCYY-MM-DD
Notes : Pair of 1 m^3 passive retroreflectors 86 m away
: from LDB2 connected via regular terrestrial
: survey for InSAR. Mounted on 6 m deep rod
: foundation oriented to ascending and
: descending sun synchronous orbits.
: More information and data available on
: request.
7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc)
Status : (PERMANENT/MOBILE)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8. Meteorological Instrumentation
8.1.1 Humidity Sensor Model : HMP45ASP
Manufacturer : Vaisala Oyi
Serial Number : A2110014
Data Sampling Interval : 10 sec
Accuracy (% rel h) : 1 % rel h
Aspiration : CAPACITIVY THIN FILM POLYMER
Height Diff to Ant : -0.5 m
Calibration date : 2005-05-23
Effective Dates : 2005-10-25/2017-01-26
Notes : The humidity sensor is 0,5 m
: below the antenna.
8.1.2 Humidity Sensor Model : HMP45A-P
Manufacturer : Vaisala
Serial Number : W5040013
Data Sampling Interval : 10 sec
Accuracy (% rel h) : 1 % rel h
Aspiration : CAPACITIVY THIN FILM POLYMER
Height Diff to Ant : -0.5 m
Calibration date : 2015-11-23
Effective Dates : 2017-01-26/CCYY-MM-DD
Notes : The humidity sensor is 0,5 m
: below the antenna.
8.1.x Humidity Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy (% rel h) : (% rel h)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.2.1 Pressure Sensor Model : PTU200
Manufacturer : Vaisala Oyi
Serial Number : X4150003
Data Sampling Interval : 10 sec
Accuracy : 0.1 hPa
Height Diff to Ant : -0.8 m
Calibration date : 2002-10-11
Effective Dates : 2005-10-25/2017-01-26
Notes : The pressure Sensor is
: 0,8 m below the antenna.
8.2.2 Pressure Sensor Model : PTU200
Manufacturer : Vaisala Oyi
Serial Number : X2930004
Data Sampling Interval : 10 sec
Accuracy : 0.1 hPa
Height Diff to Ant : -0.8 m
Calibration date : (CCYY-MM-DD)
Effective Dates : 2017-01-26/CCYY-MM-DD
Notes : The pressure Sensor is
: 0,8 m below the antenna.
8.2.x Pressure Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (hPa)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.3.1 Temp. Sensor Model : HMP45ASP
Manufacturer : Vaisala Oyi
Serial Number : A2110014
Data Sampling Interval : 10 sec
Accuracy : 0.2 deg C
Aspiration : RESISTIVE PLATINUM PROBE
Height Diff to Ant : -0.5 m
Calibration date : 2005-05-23
Effective Dates : 2005-10-25/2017-01-26
Notes : The temperature sensor is
: 0,5m below the antenna.
8.3.2 Temp. Sensor Model : HMP45A-P
Manufacturer : Vaisala Oyi
Serial Number : W5040013
Data Sampling Interval : 10 sec
Accuracy : 0.2 deg C
Aspiration : RESISTIVE PLATINUM PROBE
Height Diff to Ant : -0.5 m
Calibration date : 2015-11-23
Effective Dates : 2017-01-26/CCYY-MM-DD
Notes : The temperature sensor is
: 0,5m below the antenna.
8.3.x Temp. Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (deg C)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.4.x Water Vapor Radiometer :
Manufacturer :
Serial Number :
Distance to Antenna : (m)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.5.x Other Instrumentation : (multiple lines)
9. Local Ongoing Conditions Possibly Affecting Computed Position
9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc)
Observed Degradations : (SN RATIO/DATA GAPS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.3.x Signal Obstructions : (TREES/BUILDINGS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
10. Local Episodic Effects Possibly Affecting Data Quality
10.x Date : (CCYY-MM-DD/CCYY-MM-DD)
Event : (TREE CLEARING/CONSTRUCTION/etc)
11. On-Site, Point of Contact Agency Information
Agency : Bundesamt fuer Kartographie und Geodaesie
: Department of Geodaesie
Preferred Abbreviation : BKG
Mailing Address : Richard-Strauss-Allee 11
: D-60598 Frankfurt a.M.
: Germany
Primary Contact
Contact Name : GREF Operator
Telephone (primary) : +49 341 5634410
Telephone (secondary) : +49 341 5634432
Fax : +49 341 5634415
E-mail : operator.gref@bkg.bund.de
Secondary Contact
Contact Name : BKG GNSS Data Center
Telephone (primary) : +49 69 6333274
Telephone (secondary) : +49 69 63331
Fax : +49 69 6333425
E-mail : bkg-gdc@bkg.bund.de
Additional Information : (multiple lines)
12. Responsible Agency (if different from 11.)
Agency : (multiple lines)
Preferred Abbreviation : (A10)
Mailing Address : (multiple lines)
Primary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Secondary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Additional Information : (multiple lines)
13. More Information
Primary Data Center : BKG
Secondary Data Center : BEV
URL for More Information : https://gref.bkg.bund.de
Hardcopy on File
Site Map : (Y or URL)
Site Diagram : (Y or URL)
Horizon Mask : (Y or URL)
Monument Description : (Y or URL)
Site Pictures : Y
Additional Information : (multiple lines)
Antenna Graphics with Dimensions
TPSCR3_GGD
---------
/ + \ <-- 0.104 = L2
| + | <-- 0.081 = L1
+--------------------------------------------------+ <-- 0.071 = TCR
| |
| |
| |
| |
+-----------------+-------------+------------------+ <-- 0.003 = BCR
+-----x-----+ <-- 0.000 BPA=ARP
<-- 0.326 -->
LEIAR25.R4
+-------+ <-- 0.1995
/ \
+---+-------------+---+ <-- 0.1606 TCR
| |
|---------------------------|
|---------------------------------|
|---------------------------------------|
+---------------------------------------------+
| |
| |
+-+---------------------------------------------+-+
+-----------------+-------------+-----------------+ <-- 0.0320 BCR
| |
| |
+------x------+ <-- 0.0000 BPA=ARP
<-- 0.3802 -->
ARP: Antenna Reference Point
L1 : L1 Phase Center L2 : L2 Phase Center
TCR: Top of Chokering BCR: Bottom of Chokering
TGP: Top of Ground Plane BGP: Bottom of Ground Plane
TPA: Top of Preamplifier BPA: Bottom of Preamplifier
TOP: Top of Pole BOP: Bottom of Pole
All dimensions are in meters.
